Versions
Version 2.3.3
Download the version 2.3.3 using this link.
Version 2.3.3 Linux 32Bits
Download the version 2.3.3 for linux 32Bits using this link.
Version 2.3.3 Linux 64Bits
Download the version 2.3.3 for linux 64Bits using this link.
Version 2.3.2
Download the version 2.3.2 using this link.
Version 2.3
Download the version 2.3 using this link.
Version 2.2.3
Download the version 2.2.3 using this link.
Firmware
Version 1.0.15
Download the version 1.0.15 using this link.
Version 1.0.14
Download the version 1.0.14 using this link.
Version 1.0.13
Download the version 1.0.13 using this link.
Program
CNC Control is distributed in a single compressed file with Winrar, once downloaded you only need to unzip it to a folder, you can run the program by cncControl.exe file.
You can download the latest version at this time is 2.4 Beta from the link or download one of the versions listed above in the section on the left.
Firmware
For the program to work, you need to have installed a firmware in the arduino board. Through the following link you can get the latest version of the most recommended for use with the firmware program, or you can download the latest firmware versions on the links on the left.
Version 2.4 of the program can also use the firmware GRBL, you can access it through the following link.
Guide
You can also download the user manual of the program (in Spanish).
It is a PDF document that explains each of the parts of the program operation.If you like this program and want to collaborate for new versions and have more features in the future.